Reasons and Solutions for No Ink from Nozzle of Inkjet Printer

Inkjet printers are the most widely used advertising printing equipment. As early as more than ten years ago, inkjet printers have been used by the advertising industry. From 1.8 meters to 3.2 meters, there are 5 meters, 5.3 meters and even 6.6 meters in width on the market. More than a decade later, it will continue. The most common problem with inkjet printers is that the nozzles run out of ink. Today, Xiaobian will take you through the reasons and solutions.

The most common cause is that after the nozzle has accumulated to a certain extent, the ink is blocking the nozzle. This is easier to solve, clean the nozzle; the second possibility is that the viscosity of the ink itself is too high or too low, the viscosity is high, and the ink fluidity is poor; the viscosity is low, and the ink cannot be absorbed, thus ejecting air, the solution is to use the original ink, The ink provided by the general manufacturer has been tested and is most suitable for the paint machine of its own brand. A third possibility is fatigue or damage to the piezoelectric crystal, which requires the nozzle to be replaced. After purchasing the machine, you must consult the manufacturer on the use and maintenance methods of the machine and the nozzle, so as to prolong the service life of the machine and the nozzle as much as possible.